Jem ZR45

JEM ZR45

2000 WATT FULL-SIZED PROFESSIONAL FOG MACHINE

The JEM ZR45 is a high-end fog machine designed to deliver superior and uninterrupted performance in demanding professional applications. Via its enhanced and powerful 2,000 W heat exchanger, the JEM ZR45 produces an exceptional peak output ideal for major venues and stages in both install and rental markets.The rugged yet weight-optimized JEM ZR45 also features variable output control for more subtle effects and is fully up-to-date with integrated digital remote control, DMX and RDM.The entire JEM ZR range is compatible with a wide range of JEM Pro-Fog fluids. As machines designed and built to last, the JEM ZRs will continue to perform with great output and low consumption. 

  • High endurance high-end fog machine

  • Exceptional performance and output

  • Various control options via digital remote, DMX and RDM

FEATURES

  • Robust roadworthy design

  • Integrated Digital Remote Control

  • DMX with RDM

  • Floor standing or truss mounting (hanging bracket included)

  • 2000 W (EU model) / 1800 W (US model) heat exchanger

  • 1300 m³ (45,909 ft.³) per minute fog output

  • Variable output control for subtle effects

  • Continuous effect output

  • Compatible with a wide range of JEM Pro-Fog fluids

  • 5 l Fluid reservoir with quick-connect fitting

  • Easy external fluid connection

  • Optional Ducting Kit

SPECIFICATIONS

PHYSICAL

  • Length: 602 mm (23.1 in.)

  • Width: 395 mm (15.6 in.)

  • Height: 306 mm (12.1 in.)

  • Height with hanging bracket: 393 mm (15.5 in.)

  • Weight, dry: 17.7 kg (39.1 lbs.)

  • Weight, filled: 22.7 kg (50 lbs.)

    PERFORMANCE

  • Coverage volume: 1300 m3 (45,909 ft3) per minute

  • Fluid consumption (max.): 210 ml per minute

  • Maximum operating time, maximum output, 5 l of fluid: 1.18 hours

  • Ready time: 10-minutes

  • Continuous effect output

    CONTROL AND PROGRAMMING

  • Control options: Integrated digital remote control, DMX, master/client link mode

  • Control parameters: Continuous or timer-controlled output

  • Fog: Variable output control, 0-100%DMX channels: 1External fluid control: Fluid sensing

  • DMX compliance: ANSI E1.11 - USITT DMX512-ARDM compliance: ANSI/ESTA E1.20 RDM

    CONSTRUCTION

  • Housing: Steel and aluminum

  • Color: Black

  • Heat exchanger:

    1800 W, thermally protected (US Model)
    2000 W, thermally protected (EU Model)

    Fluid pump: Dual oscillating piston, high pressure

  • Fluid management: Fluid out sensing, sealed for transportation

  • Fluid reservoir: 5 l drop-in reservoir with quick-connect fitting

  • Remote Control: Integrated Digital Remote with 3 m (9.84 ft.) cable, 3-pin XLR

  • External Fluid Control: Fluid sensing

  • Hanging bracket: Integrated yoke with safety attachment point

    INSTALLATION

  • Mounting: Standing or hanging

  • Orientation: Up to +/-40° from horizontal

  • Clearance around machine: 100 mm (4 in.)

    CONNECTIONS

  • AC Power: Neutrik PowerCON TRUE1

  • DMX, link mode in/out: 5-pin locking XLR

  • Remote control: 3-pin locking XLR

  • Firmware: AVR socket

  • ELECTRICAL

  • EU Model:

    AC power: 220-240 V nominal, 50/60 Hz
    Main fuse: 12.5 AT (slow blow), 250 V
    Typical power and current: 2100 W, 9.2 A*

    US Model:

    AC power: 100-130 V nominal, 50/60 Hz
    Main fuse: 20 AT (slow blow), 125 V
    Typical power and current: 1800 W, 15 A*

    *Measurements made at nominal voltage. Allow for a deviation of +/- 10%.:

    THERMAL

  • Maximum ambient temperature (Ta max.): 40° C (104° F)

  • Minimum ambient temperature (Ta min.): 5° C (41° F)

  • Exterior surface temperature, steady state: 30° C (86° F)

  • Maximum nozzle temperature: 290° C (554° F)